TAF project

School work
21 Pins43 Followers
19/3/2015

19/3/2015

19/3/2015

19/3/2015

7/5/2015

7/5/2015

7/5/2015

7/5/2015

7/5/2015 Today I cut out the straps. I cut them out of the vinyl and the tartan. I sewed them good sides together then turned them inside out so that Te good sides were visible I then top stitched it so it was flat. I then attached the straps to the bag. Because on the pocket side there were many layers of fabric I used the industrial machine to attach the straps. On the other side with less layers I used the domestic machine with the walking foot so the fabric wouldn't stick.

7/5/2015 Today I cut out the straps. I cut them out of the vinyl and the tartan. I sewed them good sides together then turned them inside out so that Te good sides were visible I then top stitched it so it was flat. I then attached the straps to the bag. Because on the pocket side there were many layers of fabric I used the industrial machine to attach the straps. On the other side with less layers I used the domestic machine with the walking foot so the fabric wouldn't stick.

5/5/2015  Today I connected the end of the back to the side of it. I did this by starting from the middle top and sewing down and around the curve and then doing the other side. I then did the other end.

5/5/2015 Today I connected the end of the back to the side of it. I did this by starting from the middle top and sewing down and around the curve and then doing the other side. I then did the other end.

4/5/2015 I also sewed the bottom of the pocket to the side of the bag with top stitch

4/5/2015 I also sewed the bottom of the pocket to the side of the bag with top stitch

4/5/2015 I have been forgetting got take photos but I have sewed on the ends of the bag to the base, connected the pocket and pocket flap to the side and connected to two sides by the zip. I did some of this on the industrial machine as there were multiple layers of vinyl and it has a thinner foot. Today I top stitched along the top next to the zip on the normal machine I did some with the walking foot so that the fabric wouldn't stick to the foot.

4/5/2015 I have been forgetting got take photos but I have sewed on the ends of the bag to the base, connected the pocket and pocket flap to the side and connected to two sides by the zip. I did some of this on the industrial machine as there were multiple layers of vinyl and it has a thinner foot. Today I top stitched along the top next to the zip on the normal machine I did some with the walking foot so that the fabric wouldn't stick to the foot.

20/3/2015

20/3/2015

20/3/2015 Today I made the pocket flap. I joined the vinyl and the tartan with good sides together and sees three sides. I then turned it the right way and top stitched it flat

20/3/2015 Today I made the pocket flap. I joined the vinyl and the tartan with good sides together and sees three sides. I then turned it the right way and top stitched it flat


More ideas
Pinterest
Search