Fix or improve

31 Pins
·
4y
Mounting drawer runners can be tricky if you don't get the measurements right. I recently posted easy DIY tips for mounting metal draw...
3 Beginner Arduino Mistakes
In my decade of experience building with and teaching Arduino, I see three mistakes more often than any others. Find out what they are!
CAT5 and CAT6 wiring
Always helpful Cat 5 and Cat 6 wiring diagram. Parts are available at www.homecontrols.com/Wire-Cables-Connectors
10 Easy ways to simplify your life
Awesome article with 10 amazing tips on how to simplify your life/minimalism/ways to improve yourself/self-improvement tips. I'm so inspired by this post. I'm glad I found this post pinning this for later.
Guide to Soldering LEDs
Guide to Soldering LEDs: Save time & money with these helpful tips
On-the-Wall Mitersaw Station Woodworking Plan from WOOD Magazine
On-the-Wall Mitersaw Station Woodworking Plan
$175 Workbench | Popular Woodworking
When you glue up your top, you want to make sure all the boards line up. Lay down your glue and then clamp up one end with the boards perfectly flush. Then get a friend to clamp a handscrew on the seam and twist until the boards are flush. Continue clamping up towards your friend, having your friend adjust the handscrews as needed after each clamp is cinched down.
Electrolysis Rust Removal: How to Remove Rust with Electrolysis
The simple process of removing rust with electrolysis. Who knew it was so easy?
How To Re-Season Cast Iron Pots
Don't toss this dry, rusty cast iron pan! Here's how to restore it good as new.
Made my own shadowed tool box using a hot knife and foam floor mats, a cheaper option and even works better than using tool box foam.
Make an instant junky toolbox charging station
Make an instant toolbox charging station for your iPhone! Also info on how to degrease and protect old, chippy metal. via http://www.funkyjunkinteriors.net/