Explore Printer Plate, 21 3dbenchy and more!

Explore related topics

21 #3DBenchy boat 3D-printed on ZYYX 3D printer plate in one go v01 | by #3DBenchy

21 #3DBenchy boat 3D-printed on ZYYX 3D printer plate in one go v01 | by #3DBenchy

21 #3DBenchy boat 3D-printed on ZYYX 3D printer plate in one go v02 | by #3DBenchy

21 #3DBenchy boat 3D-printed on ZYYX 3D printer plate in one go v02 | by #3DBenchy

21 #3DBenchy boat 3D-printed on ZYYX 3D printer plate in one go v04 | by #3DBenchy

21 #3DBenchy boat 3D-printed on ZYYX 3D printer plate in one go v04 | by #3DBenchy

21 #3DBenchy boat 3D-printed on ZYYX 3D printer plate in one go v03 | by #3DBenchy

21 #3DBenchy boat 3D-printed on ZYYX 3D printer plate in one go v03 | by #3DBenchy

21 #3DBenchy boat 3D-printed on ZYYX 3D printer plate in one go v07 | by #3DBenchy

21 #3DBenchy boat 3D-printed on ZYYX 3D printer plate in one go v07 | by #3DBenchy

21 #3DBenchy boat 3D-printed on ZYYX 3D printer plate in one go v05 | by #3DBenchy

21 #3DBenchy boat 3D-printed on ZYYX 3D printer plate in one go v05 | by #3DBenchy

21 #3DBenchy boat 3D-printed on ZYYX 3D printer plate in one go v06 | by #3DBenchy

21 #3DBenchy boat 3D-printed on ZYYX 3D printer plate in one go v06 | by #3DBenchy

Failed 3D prints is something that many3D printer operators have experienced.  The most critical moment during a 3D print usually is the first layer. The model has to firmly stick to the build-platform in order for the 3D model print correctly.  The blob you can see here is a #3DBenchy 3D-printed on an FFF 3D printer using standard settings: 0.2 mm/layer and 2 perimeters.  The build-plate was not calibrated correctly being too far away from the printhead. The first layer detached from the…

Failed 3D prints is something that many3D printer operators have experienced. The most critical moment during a 3D print usually is the first layer. The model has to firmly stick to the build-platform in order for the 3D model print correctly. The blob you can see here is a #3DBenchy 3D-printed on an FFF 3D printer using standard settings: 0.2 mm/layer and 2 perimeters. The build-plate was not calibrated correctly being too far away from the printhead. The first layer detached from the…

Retrodalek 3D printed MakerBot Replicator 2 - PLA blue frogs - Layer thickness comparison plate by CreativeTools

Retrodalek 3D printed MakerBot Replicator 2 - PLA blue frogs - Layer thickness comparison plate by CreativeTools

Pinterest
Search