DIY No Waste Feeder (might try this with 5-gallon buckets instead, since I have some of those.)

DIY No-Waste feeder!

A cheap way to make a “no waste” chicken feeder for those chickens that are messy eaters. With conventional feeders, when chickens peck at the feed, they will pull out…

PVC towel rack  I bought three 10′ pvc pipes (3/4″)8 pvc standard T’s 2 pvc elbows 2 end caps  (Note:  make sure that the standard-T’s, elbows and caps are all the same size as the pvc pipe you’re using, and that they’re not threaded.  The project won’t come together nearly as easily if things don’t fit)    The towel rods were cut at 36″ each – which is the actual width of a standard beach towel.  We built each side by starting with a 24″ piece of pvc (the bottom).  Add a standard T  Add a 8

PVC towel rack

20 Affordable PVC Pipe Projects That Are Pure Genius

20 Affordable PVC Pipe Projects That Are Pure Genius

PVC Projects: Laptop Stand From PVC Pipes! Maybe if we used the laptop more.

The best thing about him is that he was very inexpensive.The white material came from the local furniture stores and used PVC pipe. purchased the large skull at Michaels for $5 spent 4 $ for pvc elbows

My friend and I are working hard on props for our haunted trail this year. Here is our latest. He was so huge we had to suspend him from the roof to a

How to Build a Easy DIY Solar Pool Heater. All you need is 4 two foot lengths of pvc, 4 90 degree pvc elbows, foam pipe insulation, duct tape, 6 mil black plastic and some wire ties. The project takes less than one hour. This design works great for above and in ground swimming pools. http://www.diyeasycrafts.com/:

How to make a easy DIY Solar Pool Heater. This how to project is easy and takes less than one hour. All you need to get started is 4 two foot lengths of PVC,.

Of Faith & Fiber: Trellis follow up

Lattice and cheap PVC pipe from the hardware store - would work for displaying so many different things. I like the idea of inserting rods into the ground and placing the pipe over it for outdoor display.

Bookshelves can be very expensive, but all you really need are some pvc pipes, pine wood boards and a few power tools you may already own and an afternoon! Get this industrial chic look in any corner of your house with this step-by-step how-to: http://www.ehow.com/how_5005351_make-pvc-book-shelves.html?utm_source=pinterest.com&utm_medium=referral&utm_content=freestyle&utm_campaign=fanpage

How to Make PVC Book Shelves

Bookshelves can be very expensive, but all you really need are some pvc pipes…

1-1/4" PVC Adjustable Elbow - Get the angle you need for your PVC project!  Adjusts to any angle within a 285 degree arc!

1-1/4" Adjustable PVC Elbow Fitting - Furniture Grade

PVC Adjustable Elbow - Get the angle you need for your PVC project! Adjusts to any angle within a 285 degree arc!

pic+9.jpg 1,600×1,062 pixels

I'm not a huge fan of canopy beds- but this is genius and would be great outside on the patio for summer! Take It From Me: DIY Canopy Bed Tutorial (Guest Post)

This is one of my favorites to illustrate that vibrations cause sound. Use a rubber band to attach a piece of thin rubber (a piece of a balloon or rubber glove) to one side of a PVC elbow. Put a few pieces of rice on the taut piece of rubber. Talk into the open end of the PVC pipe and watch the rice dance (sound waves). The louder you talk, the better the rice jumps.

Teaching Sound - This is a PVC elbow with a rubber band around cut balloon covering the end. Place rice on top and talk into it to see the sound waves vibrate!

How to Build a Easy DIY Solar Pool Heater. All you need is 4 two foot lengths of pvc, 4 90 degree pvc elbows, foam pipe insulation, duct tape, 6 mil black plastic and some wire ties. The project takes less than one hour. This design works great for above and in ground swimming pools. http://www.diyeasycrafts.com/:

How to Build a Easy DIY Solar Pool Heater. All you need is 4 two foot lengths of pvc, 4 90 degree pvc elbows, foam pipe insulation, duct tape, 6 mil black plastic and some wire ties. The project takes less than one hour. This design works great for above and in ground swimming pools. http://www.diyeasycrafts.com/:

Parts List 2 – 90 degree PVC elbows 3 – 45 degree PVC elbows 1 – 4-Way PVC Cross 2 – 1 1/4 “ --> 1” PVC Adapters 1 –...

Monster Mud Reaper

Parts List 2 – 90 degree PVC elbows 3 – 45 degree PVC elbows 1 – 4-Way PVC Cross 2 – 1 1/4 “ --> 1” PVC Adapters 1 –...

Sabine Wren • mandalorianmercs Official #MandoMercs member...

mandalorianmercs Official member Eitanya used PVC elbow joints to achieve a better curvature for her Star Wars Rebels Sabine shoulder armor. See more of her completed costume here:.

Pinterest
Search