Pinterest • The world’s catalogue of ideas
from Interior Design

Gateway to the Gates Foundation: Visitor Center by Olson Kundig

Laminated Plywood letters. Gateway to the Gates Foundation: Visitor Center by Olson Kundig

145
16

Beautiful floor made from the ends of 2x4's!! took two days. a heavy bed of Bostic Best adhesive, 25 feet per gallon to act as moisture barrier and glue. Installed on 3/4 plywood Pieces were 3/4 inch thick.sanded, trowel filled with Glitsa wood flour fill, then poly sealed and gave two coats of Bona natural finish. by rebecca2

15

This CNCed Spiral staircase was made using the X-Carve by Inventables.com and is made from ¾” thick furniture grade plywood. For more information go to HomeMade-Modern.com

12
2
1

Marine plywood with a 3mm or 6mm thickness might cost more than alternatives, but you can use different stains to replicate a reclaimed plank wall that is light enough to mount with ease.

487
52

DIY Kids table: (1) 2x4 8' (1) 1x2 8' (you only really need 2') (1) 24" x 48" sheet of 3/4" thick plywood (1) 12" x 29" sheet of 3/4" thick plywood (we used a scrap piece that we had) 2" Screws 1 1/4" Screws Wood Glue Paint

1.4k
132

LOVE THIS! 2 X 4 end pieces!!! The Instalation took about two days. We used a heavy bed of Bostic Best adhesive, 25 feet per gallon to act as moisture barrier and glue. Installed on 3/4 plywood on top of a crawl space. Pieces were 3/4 inch thick. My sons and I sanded, trowel filled with Glitsa wood flour fill, then poly sealed and gave two coats of Bona natural finish.

2.3k
263
1